for Venetian & Marmorino Plasters
Synthetic paste for water protection
CERA has been specifically formulated in order to give a high sheen to all surfaces
bearing a lime Stucco finish and to protect them against water. Therefore CERA
may be easily applied over Venetian Plasters as well as all sorts of polished
Marmorino finishes, such as MARMUR FINE. CERA contains synthetic waxes with
a high melting point. It's solvent-free and contains cellulosic and rheologic
modifiers. CERA therefore causes no allergic reactions. One single coat, fairly
easy to apply, guarantees usually for good results.
CERA is usually applied as a protective top coat over Venetian Plaster finishes.
It therefore increases the glossy degree and water resistance of the final coat.
From this comes its major application inside kitchens and bathrooms.
The surface must be perfectly dry, sound, dust free, with no humidity nor salt
Application Procedure & Recommendations:
CERA is usually applied with a soft cotton rag, dipped in the product which
requires no water dilution. When the surface is dry, polish it with a clean
rag, until it becomes completely glossy and tacking-free.
30/40m2 per lifter.
Specific weight: 0,9kg/dm3. Viscosity: from 1700 to 1900 cps (Brookfield standard).
Dry content at 105°C: 17% ± 2%. pH: 8-8,5.
Transparent, Gold or Silver.
Packaging and Shelf Life:
Packaged in 0,750 lt and 2,5 lt tins. The packaged product, if stored at temperatures between
+5 and 35°C, is guaranteed for 12 months.
Dispose of the empty packaging and remaining material in compliance with local
laws. CERA contains no dangerous substances; in case of direct eye contact wash
out immediately eye and skin with plenty of fresh water for 15 minutes. Should
any kind of irritation occur, seek medical treatment. Skin must be washed out
with soap and water. Ingestion: Immediately seek medical treatment.
Protective top coat for lime Stucco Antico and "Marmorino" finishes
consisting of one coat of a synthetic transparent wax, type CERA manufactured
by Novacolor, Forlì. The product shall be applied with a soft cotton
rag, dipped in the tin of CERA. When the surface is perfectly dry, polish it
with a clean soft rag until it gets completely dry, with a uniform level of
sheen and tacking free. Exclusive of scaffolding, inclusive of flooring, frames
and plant protection