Teodorico

Venetian Plaster and Tools
Plaster Tools
Teodorico - Silver - NVC-TD-S

Teodorico - Silver - NVC-TD-S

Teodorico Gold, Silver and Bronze

Lime-based finishing coat with metallic highlights.

General Features:

Teodorico is a lime based finishing plaster coat, formulated with traditional and historical “recipes” and therefore contains well seasoned hydrated lime putty, fine marble powder, coloring oxides and earths, linseed oil and rheologic modifiers, which guarantee a perfect workability of the product. The product is intended for the decoration of interior and exterior walls and contains metallic highlights (bronze-silver and gold) which give to the surface highly sophisticated decorative features.

The high alkalinity typical of lime and a its high permeability rate make Teodorico a perfect natural anti mold agent.

Texture:

Teodorico looks perfectly smooth and even with gold, silver or bronze highlights.

Uses:

Teodorico is a decorative finishing coat for interior or exterior use. Natural lime or mineral plasters are Teodorico’S most suitable substrate, since the product reacts chemically with them, building up a unique “body” able to preserve this lime coating for a longer period of time.

Following the correct surface preparation instructions Teodorico may also be applied over:

  • Marmorino ks, Marmur Fine
  • Lime and Cement Mortars
  • Premixed renderings containing minimum 30% of lime
  • Pre-existing lime and gypsum plasters
  • Moisture-permeable plasters
  • Gypsum plasterboard

Surface Preparation:

The substrate must be flat, smooth, dry and dust-free, with no humidity and salts stains. New natural lime or mineral substrates: wet thoroughly the wall with clean water, especially in case of windy and extremely hot weather.

New or recent lime and cement mortars, premixed renderings, gypsum and plaster boards: apply one priming coat of Teodorico, mixed 1:1 with IsoSil (siloxane clear sealer) and 4/5 parts of clean water. Let dry 4-6 hours then apply Teodorico.

Pre-existing chalking lime plasters: remove damaged and peeling areas with an adequate tool or high-pressure washing; apply one priming coat consisting of MARMUR Fine mixed 1:1 with IsoSil (siloxane clear sealer) and 4-5 parts of clean water. Let dry a few hours then smooth the wall with one coat of MARMUR Fine, if necessary. Wait at least 4-6 hours prior to the application of Teodorico lime coating.

Old synthetic paints and plasters: remove the synthetic finishing coat with a paint remover containing no paraffin. Wash the substrate by means of a high-pressure washing and prepare it according to its nature and following the instructions above.

Application Procedure & Recommendation:

Teodorico lime plaster is ready for use and therefore does not require any water dilution. Apply in two coats with a stainless steel trowel It is recommended to wait 8 hours between the 2 coats. Work into the second coat, while it is still setting, with a sponge float. The “marbling effect” typical of Teodorico with the metallic highlights is achieved by polishing the second final coat with an inox trowel like, which must be kept wet with water and passed over the substrate until the required level of sheen has been reached.

Do not apply with rainy weather or with air or substrate temperature below 5° C.

Protect the facades from rain, at least along the first 48 hours, i.e. until lime has finished to set and started to get hard.

Yield:

Teodorico: (1.2-1.5 kg per m2) or (7.2 -9 ft2 per kg ) in two coats, depending on the roughness of the substrate

Specific Weight:

1.40 kg/dmc

Color Range:

Neutral Bases (Gold, Silver and Bronze) to be tinted with Novaterrae and Novaterrae Deco, or pigments stable to lime.

Packaging & Shelf Life:

20 kg pails. The packaged product, if stored at temperatures between +5 and 35°C, is guaranteed for 12 months.

Warning:

Dispose of the empty packaging and remaining material in compliance with local laws.

Specification:

Application of Teodorico lime coating, containing well seasoned hydrated lime putty, fine marble powder, coloring oxides and earths, linseed oil and rheologic modifiers, and gold, silver or bronze highlights, manufactured by Novacolor, Forlì, and applied in two coats with a stainless steel trowel according to the manufacturer’s instructions, smoothed down with a sponge float and eventually polished with an inox trowel.

The substrates will be previously treated as follows (choose your specific case and calculate this as a separate charge):

New natural lime plasters: the substrate should “mature” for a period of minimum 20 days; then apply Teodorico lime plaster and wet thoroughly the wall in case of windy and extremely hot weather.

New or recent lime and cement mortars, premixed renderings, gypsum and plaster boards: apply one priming coat of MARMUR Fine, mixed 1:1 with IsoSil (siloxane clear sealer) and 4/5 parts of clean water. Let dry 4-6 hours then apply Teodorico decorative lime coating.

Pre-existing chalking lime plasters: remove damaged and peeling areas with an adequate tool or high-pressure washing; apply one priming coat consisting of Teodorico mixed 1:1 with IsoSil (siloxane clear sealer) and 4-5 parts of clean water. Let dry a few hours then smooth the wall with one coat of MARMUR Medium or Fine, if necessary. Wait at least 4-6 hours prior to the application of Teodorico lime coating.

Old synthetic paints and plasters: remove the synthetic finishing coat with a paint remover containing no paraffin. Wash the substrate by means of a high-pressure washing and prepare it according to its nature and following the instructions above.

olea